|
|
High Power Cree Police LED Flashlight Battery+Charger
|
|
|
|
|
Specification
|
Dimension
|
Total length 235mm
|
|
Luminous
|
400LM
|
|
Max Dia. 56.5mm
|
Run time
|
1.6h when 100% brightness
|
|
Min Dia.25mm
|
Body material
|
Aerospace-grade aluminum
|
|
Weight
|
240g (w/ battery)
|
Surface treatment
|
Hard-anodized
|
|
Light source
|
Cree Q5 Led
|
Battery
|
1pc 18650 Li-ion battery
|
|
Charge time
|
4 hours
|
|
Application
Tactics action
Mountain-climbing
Searching
Self-defense
|
|
|
|
|
Come with :
1 Wall Charger
1 Car Charger
1 18650 Li-ion
Battery
|
|
|
|
|
|
|
|
Product Features
1) Five functions: 100%,
30% and 10% brightness, strobe and SOS
2) Newest charging tech
with patent, easy charging.
3) Offensive design,
anti-rolling, waterproof.
4) Battery with protection
board, no worry about over charge or over discharge.
| ⅰ.Battery
install
|
|
Unscrew
the cap and put into the battery and then screw it
on.
Note: Be
sure the anode of battery forward, or else it would
not work.
|
|
|
ⅱ.
Lighting modes changing
|
|
1) 100%
brightness suitable for searching and rescuing, or
long distance lighting.
2) Press the cap switch for two
times, it turned to strobe model with the frequency
of 10Hz, its applicable warning.
3) Press the cap switch for two times again, it
turns on SOS function.
4) Press the cap switch for two times again, it
turned to strobe model with the frequency of 10Hz,
its applicable warning.
5) Press the cap switch for two times again, it
turns on SOS function.
6) If you do not use this torch for a long time,
please turn the end cap anticlockwise for 1-2
circles to lock it and avoid turning on
unintentionally.
|
|
|
ⅲ.
Charging method
Checking
whether the torch works before charging, only charge it if
it works well.
1) Turn grab handle anticlockwise to
expose the charging socket. (Picture
3)
2) Connect the AC charge to 110-230V
power and insert another end of charge to the charging
socket on torch (Picture 4), and then turn on the torch (If
charger indicator light is red, it means on charging; if it
turns to green, it means full charged). The charging time
for original 18650 battery is about 4 hours.
3) When battery full charged, remove
the charger and turn the grab handle clockwise to close the
charging socket, torch can be worked. (Picture 5)
|
|
Ⅵ
Maintain
1). Please clean flashlight after use.
2). Do not expose the torch to
sunshine, water, chemicals or corrosive gas for a long time.
Avoid destroying the hard-anodized surface. If flashlight
outside be tainted with seawater or other corrosive
materials, please wash it with clean water and dry it with
hair drier in time.
3). To make flashlight easy screwing,
please daub some waterproof silicone grease on thread.
4). Take out battery from flashlight if
do not use it and keep it in shade place.
5). Battery should be charged six three
months if it never worked.
|
|
Notes
1. Do not point to eye directly when it
turns on, it would cause permanent hurt.
2. Do not disassemble the flashlight
head to avoid damage happened.
3.Do not throw the battery into fire,
and please treat it according to recycle articles.
|
|
|
|
|
|
|
|
|